cPanel Migration

Moving your emails from a cPanel server to another provider, or the other way around? This tutorial shows how to migrate individual cPanel mailboxes step by step – plus how to migrate whole servers with the bulk migration.

  • Works in Any Direction From cPanel to any provider, or from any provider to cPanel.
  • All Folders & Attachments Complete mailbox, folder structure and metadata – an exact 1:1 copy is created.
  • 100% Fail-Safe Absolutely no risk of data loss: The original mailboxes stay untouched.
  • Bulk Migration Migrate unlimited mailboxes or a whole server in one go – with CSV upload.
Easy email migration with MailJerry

Summary:

Here's how you can easily perform a cPanel migration:

  1. Connect your mailbox by entering the login details of your old and new account.
  2. Check the migration preview to confirm everything is set up correctly.
  3. Start the cPanel migration and let MailJerry do the rest.

The result:
When the migration has finished, you'll find an exact 1:1 copy of your existing email data in your new mailbox. And what about messages that land in the old mailbox later after the migration? The automatic delta migration takes care of it.

Are you migrating a whole server or dozens of mailboxes?
Skip ahead to the bulk cPanel migration – it lets you migrate unlimited mailboxes in one go.

How to Perform a cPanel Migration

The following steps walk you through migrating an individual mailbox from or to cPanel. The tutorial applies to both directions, no matter if you're migrating your data from cPanel to another account or from any account to cPanel. No matter which provider you're relying on, you don't need to change any settings in cPanel or prepare your mailboxes in any way. All you need are the login credentials of both mailboxes and the matching mail server addresses.

Need to migrate lots of mailboxes or a whole server at once? Then use the bulk cPanel migration – you'll find the step-by-step instructions at the end of this tutorial.

Step 01: Migration Setup

1

Open MailJerry, enter your email address or license key and click on New Migration.

2

Under Existing Address, select the account type of your old mailbox: IMAP if you're migrating from cPanel – or the matching provider (Gmail, Microsoft 365, Yahoo, iCloud, IMAP…) if you're migrating to cPanel.

3

Enter the username (usually the full email address) and password of the source mailbox.

4

Fill in the mail server address – for cPanel, that's the IMAP server of your hosting plan, e.g. mail.yourdomain.com. For Gmail, Microsoft 365, Yahoo and iCloud, you don't need to provide a mailserver address.

5

Under New Address, select the account type of your target mailbox – IMAP for a cPanel account, or the matching provider for anything else.

6

Enter the login credentials of the target mailbox and, if it's an IMAP account, also enter the mail server address.

Step 02: Preview the Migration

1

Click on Check Settings. MailJerry now connects to both mailboxes, verifies the login data and gathers all information necessary for the migration.

2

Once the check is complete, you'll see a preview of your planned migration – account details, folder structure and the number of emails that will be moved.

Migrating a large mailbox? In this case, the mailbox check might take a little longer. Please be patient, there's no need to restart anything – the preview appears automatically once the check has completed.

Step 03: Perform the Migration

1

Everything looks correct? Then click on Start Your Migration. MailJerry now copies your email data from your source mailbox to the target account.

2

Now wait until the migration has finished or start another migration right away. Both mailboxes stay fully usable during the migration, so you can use them to receive or send emails, even if the migration takes some time to complete.

Please avoid structural changes to either mailbox while the migration is running – moving or deleting folders and large amounts of emails mid-process is a common cause for duplicate emails.

Done! Once the migration has finished, your new mailbox contains all email data from your old account – a 1:1 copy with metadata, flags and folder structure intact.

Pro Tip: Delta Migration

The initial migration is done – but in many cases, the old mailbox doesn't go offline right away. Maybe you still need to update email clients, or the domain's DNS records are still pointing to the old server for a while. Emails that arrive in the source mailbox during this time don't have to be moved over manually: MailJerry's delta migration picks them up automatically.

How to Enable the Auto Sync:

1

In the MailJerry app, open the Overview and select your migration.

2

On the details page, scroll down to Options.

3

Click on Automatically Synchronize Emails for 10 Days.

For the next 10 days, MailJerry checks the source account every three hours and migrates any new emails automatically. Need a sync right away? Simply click on Sync Now on the details page.

Keep Mailboxes in Sync Permanently: Backup Mode

The auto sync stops after 10 days, which is usually enough time to switch email accounts. But if you want your mailboxes to stay in sync indefinitely, the backup mode is the right choice:

1

Open your migration in the overview and scroll down to Advanced Settings.

2

Click on Backup Mode.

3

Enable Permanently Sync Emails to Target Mailbox.

From then on, every email that reaches your source mailbox is synced to the target account – without any time limit. The sync interval is adjustable: Daily, weekly or monthly, whichever suits your setup.

Bulk cPanel Migration

One mailbox at a time works fine for a single account – but if you're moving an entire cPanel server or managing dozens of mailboxes, starting each migration individually gets old fast. For cases like these, MailJerry offers the bulk migration: Set up all accounts in one pass or upload a CSV file with all accounts, and start all migrations with one click.

How to Set Up a Bulk cPanel Migration:

1

In MailJerry, click on Bulk Migration.

2

Enter the mail server addresses of your old and new mail server.

3

In the Mailboxes section, add the login credentials of every mailbox you want to migrate – or skip the typing entirely and upload a CSV file with all accounts.

4

Once all mailboxes are added, click on Check Mailboxes and wait for MailJerry to verify each account.

5

If the check comes back clean, click on Start Migrations.

The first 20 mailboxes start migrating right away. Everything else lines up in the queue, and as soon as one migration finishes, the next mailbox starts automatically – you don't have to supervise anything!

Frequent Questions:

Is my provider supported by the mailbox migration tool?

In 99.9% of all cases, the answer is Yes! MailJerry works with all major providers like Gmail, Microsoft, Yahoo!, GoDaddy or iCloud and all providers that offer IMAP access. So as long as your mailbox data is stored on your providers server, you are good to go!

If you are not sure if MailJerry works with your provider, simply start a new migration and follow the steps until you reach the pre-migration summary. If everything looks good on the summary page, MailJerry works with your provider.

By the way, you do not need a license key to perform the pre-migration check.

Where do I find the address of my mailserver?

Usually, you find the address of your mailserver on the data sheet you received from your hosting provider or on the respective help page of your hosting company.

But here's a quick tip: Open the MailJerry email migration software, go to Migrations and enter your email address (yourname@domain.tld) in the field Username. With the stated email address, MailJerry can guess your hosting provider and very likely suggest the correct mail server address.

In case your username differs from your email address, don't forget to change the value in the username field back to the username stated by your provider.

Can I use my email accounts during the migration?

Yes – but this only applies to cloud migration tools like MailJerry Both accounts remain fully available while the migration runs, and emails that arrive in your old account in the meantime can be picked up with a re-sync afterwards.

What is a delta migration?

A delta migration syncs all emails that arrived in your old mailbox after the initial migration – so nothing gets left behind.

What is the auto-sync feature and why should I activate it during a domain transfer?

The auto-sync feature (mailbox sync) keeps the new mailbox up to date for 10 days after the initial migration. During a domain transfer, this means emails arriving at the old address after the initial migration are automatically copied to the new mailbox.

This gives your clients a buffer to switch to their new address without losing any emails. In contrast, the backup mode creates ongoing backups rather than a 10-day sync window. For domain transfers, we recommend activating auto-sync to ensure a seamless transition.

What happens to queued mailboxes? Do they start automatically?

Yes, queued mailboxes start automatically as soon as one of the running migrations finishes. You don't need to manually start them.

How long does an email migration take?

That depends on the size of your mailbox and how fast your email providers respond. With a cloud email migration tool like MailJerry, most migrations are finished within a few hours – and since both accounts stay available during the migration, you can keep working in the meantime.

I have further questions. Where can I get help?

On our help center, we answer many frequent questions. And in case you don't find an answer to your question, our support team is happy to help.